Nerf XX-700分頁裝訂器模塊套件

請勿售賣，這會打擊作者的創作積極性。
PLEASE DO NOT PRINT AND SELL THIS PRODUCT BECAUSE IT WILL PREVENT ME FROM RELEASING OTHER DESIG
1.終結者主體不需要任何切割，無損安裝。
This kit does not need any shell cutting to itall
2.不過一些地方需要打磨，一些地方需要使用紙膠帶固定或者加厚，有的地方需要螺絲固定，彈匣殼側面需要機米螺絲固定彈匣
For some places you might need to sand down the shell a little bit or use paper tape to make sure it stays in place. For some places you need to use a screw to let it stay fixed and for the mag cover you will need to use some set screws
3.螺絲的規格跟nerf原裝螺絲相同,部分零件提供了多種選擇。
You can use nerf blaster screws for all the parts and there are multiple choices for you to choose for each part
4.目前有短突跟下拉加長兩個版本。
There are currently 2 veio: CQB style and one with a longer barrel
5.彈匣殼基于rival通用彈匣設計。
The mag cover is compatible to all nerf rival mags (not worker mags sorry)
6.滑塊使用M47cm 的2根內六角螺絲，以及一根M57cm 的內六角螺絲，金屬推桿需要根據你使用的下拉型號單獨定制。
The pump grip uses two M470mm screws and a M570mm screw, for the priming ba it varies from what pump kit you’re using, for the connector you will need two M410mm screws.
7.如果使用套件中的打印下拉，金屬拉桿，325mm長，2mm厚，12mm寬，螺絲使用M41cm2，金屬桿打孔位置請參考圖片，一格為1mm?；蛘咧苯哟蛴riming ba_test進行對比。
If you’re using the pump grip in my files, the dimeio for the priming ba are 325mm12mm*2mm and you will need two of drilling the priming ba please refer to the picture or just print the file priming ba_test
8.幾乎所有零件都留有尺寸余量，所以即使你的打印機并不精確，也可以打印。
All the models has been left a little bit more space in size so even if your printer is not accurate enough you will still be able to print and use it
因?yàn)槲医?jīng)常加班，很抱歉不能把尺寸做精確。后續如果有空閑時間，我會繼續完善它.
I’m very busy and always work overtime so apologies that I can’t make the dimeio exact. But if I have time I will keep perfecting it.
釋放的原始作者：
ReleaseLever Original author：
感謝兔團cheng在制作過程中給與的建議。